Event 2020 bas v3 studie monitor (1 Stk.) **UDSOLGT**

1.695,00

Event 2020 bas v3 studie monitor (1 Stk.) - Gode studio monitors med 7,1" bas og 1,5" diskant. Denne to-vejs højttaler indeholder en række grundlæggende forbedringer i forhold til den oprindelige model, men er stadig tro i forhold til den tonale karakter og præstation. Event’s ingeniører brugte ideer og teknologier fra flagskibet Opal at opnå resultater i overensstemmelse med virksomhedens design filosofi om høj ydelse, lav forvrængning og fremragende dynamik. På Event’s hjemmeside kan du læse mere om hvilke verdensberømte producere som bruger 20/20bas V3. Bemærk: Pris for 1 stk.

Frequency Response 35Hz - 20kHz ±2dB   
Crossover Frequency 2300Hz    
3rd Harmonic Distortion @ 90dB SPL, 1m, 500-7kHz  0.08%    
3rd Harmonic Distortion @ 90dB SPL, 1m, 200 - 20kHz 0.2%    
3rd Harmonic Distortion @ 90dB SPL, 1m, <200Hz 1.5%    
Acoustic Output - SPL @ 1m, Long term  (80Hz - 20kHz) 105dB    
Acoustic Output - SPL @ 1m, Peak (80Hz - 20kHz) 108dB    
Signal Input XLR, RCA (balanced/unbalanced) 
Frequency Response 20Hz - 20kHz(±0.2dB)  
LF Trim Constantly variable ±3dB  
HF Trim Constantly variable ±3dB  
Subsonic Filter -3dB @ 30Hz   
260mmW x 375mmH x 300mmD 
17kg 

Model/varenr.: EVENT 2020 BAS V3
Vægt: 17 kg

Levering, Fragt, Returret

Andre købte også

System

Frequency Response
35Hz - 20kHz ±2dB
Crossover Frequency
2300Hz
3rd Harmonic Distortion @ 90dB SPL, 1m,
500-7kHz
0.08%
3rd Harmonic Distortion @ 90dB SPL, 1m,
200 - 20kHz
0.2%
3rd Harmonic Distortion @ 90dB SPL, 1m,
<200Hz
1.5%
Acoustic Output - SPL @ 1m, Long term
(80Hz - 20kHz)
105dB
Acoustic Output - SPL @ 1m, Peak
(80Hz - 20kHz)
108dB
Signal Input
XLR (balanced)

Low Frequency Transducer

Piston Diameter
180mm (7.1")
Voice Coil Configuration
High temperature single coil
Voice Coil Diameter
38mm (1.5")
Former Material
High-strength Polyamide - Glass Fiber
Magnet Type
Ferrite
Cone Type
Mineral Filled Polypropylene
Magnetic Shielding
Bucking magnet and steel cap

High Frequency Transducer

Dome Diameter
25.4mm (1")
Voice Coil Diameter
25mm (0.98")
Magnet Type
Ferrite
Dome Type
Silk
Gap Design
Ferrofluid Cooled
Magnetic Shielding
Bucking Magnet

Amplifier - Low/high frequency

Frequency Response
20Hz - 20kHz(±0.2dB)
Operating Band Pass
20Hz - 2400Hz (LF)/2400Hz - 20kHz (HF)
Total Harmoic Distortion
0.01% 120 Watts into 4 Ohm Load
Long Term Power @ 4 Ohms
80 Watts
Burst Power @ 4 Ohms
120 Watts
Output Topology
Class AB
LF Trim
Constantly variable ±3dB
HF Trim
Constantly variable ±3dB
Subsonic Filter
-3dB @ 30Hz
Driver Protection
Current Limiting
Temperature Protection
Thermal Cut-Off Switch
Indicators
Event badge 'On' mode
Cooling
Convection - Aluminium Heat Sink
Power Requirements
Voltage selector 110-120V or 220-240V, 50/60Hz, 180VA
Power via detachable 3 circuit IEC type linecord

Physical

Cabinet Construction
MDF
Low Frequency Vents
Front Port
Cabinet Dimensions
260mmW x 375mmH x 310mmD
(10.2"W x 14.8"H x 11.8"D)
Cabinet Weight
17kg (37.48lb)
Shipping Dimensions
375mmW x 495mmH x 415mmD
(14.8"W x 19.5"H x 16.3"D)
Shipping Weight
19kg (41.88lb)

For mere information, besøg dette produkts hjemmeside.

Der er endnu ikke nogen anmeldelser her. Vi vil være glade for hvis du vil anmelde som den første.

Tilføj anmeldelse: